sane-backends-autoconfig-1.0.27-lp150.4.1 >  A Z1/=„"?9k˃zb @ÿqa[ʩ;o:Ko=,2mdU$Ŗ^.fJh*Xrr{voy{odoK?s PHu*v}"jE#\%'ܩ:xpN?ZaĹi>8_x+6KS0h_w;V}C֥h73 ' wa'sc]Wbc,Q|%E9919bc3081c6f4f5003fc1044b71dc434430f697ab14b1ef02587b1e9867de7bef5f0ced8b862cd4c8b59a5882bd02e279f10cb10cZ1/=„~7Q]^ 8;UO΍,rŪۋI/JGB֌]y#_߻ѿu5Km,! 1Ayt^_yZ(3xJi- ]2tH0Cu Vҹ{\(;~x<"۬>*@]dhi& Ű8 [{z5f[ƪs>G㖁Nz8+q>U](4\#u· .ΝMR=> oߝi2a817$>p>T?Td" , J,08<OX     C HTcri(8-9D-: -FReGRxHRIRXRYR\R]R^RbScSdT,eT1fT4lT6uTHvTTzTiT|TTTTTTCsane-backends-autoconfig1.0.27lp150.4.1USB Scanner AutoconfigurationUSB scanner autoconfiguration happens via udev. The file /etc/udev/rules.d/56-sane-backends-autoconfig.rules contains entries for those USB scanners where the USB IDs are known, which are supported by a free driver, where the support status is "complete" or "good", and which do not require firmware upload. When a USB scanner is connected and its USB IDs match to an entry in the 56-sane-backends-autoconfig.rules file, the matching scanner driver is activated (i.e. the driver line in /etc/sane.d/dll.conf is activated). It enables scanner drivers but never disables them. The reason is that enabled drivers do not hurt so that an automated disable would make it only overcomplicated because when more than one scanner uses the same driver, a complicated check would be needed to avoid that the driver is accidentally disabled when only one scanner was disconnected. If you do not like automated driver activation, do not install this package or remove it when it is already installed.Z0lamb12openSUSE Leap 15.0openSUSEGPL-2.0+ and LGPL-2.1+ and SUSE-Public-Domainhttps://bugs.opensuse.orgHardware/Scannerhttp://www.sane-project.org/linuxx86_64AA큤Z0Z0Z0ef0273ce769dac48254cfa70f57c58e1fc51d76c1e14152dd75c625c5867efa2rootrootrootrootrootrootsane-backends-1.0.27-lp150.4.1.src.rpmsane-backends-autoconfigsane-backends-autoconfig(x86-64)    rpmlib(CompressedFileNames)rpmlib(FileDigests)rpmlib(PayloadFilesHavePrefix)rpmlib(PayloadIsXz)sane-backends3.0.4-14.6.0-14.0-15.2-14.14.1ZJ@ZI@YYC@Y%uXf@V@V@VTZ@RR6Q]k@Q7/PP @P}L@P6@OOOhq@O.o@NN]MMMa@M[@MLL@L KFKK#@Kf@K+nJ@J@JH@Jv@J$J@Jp9J2C@J/@jsmeix@suse.dejsmeix@suse.demeissner@suse.comnmoudra@suse.comjsmeix@suse.dejsmeix@suse.deolaf@aepfle.destefan.bruens@rwth-aachen.dejsmeix@suse.dejohannes@lst.dejsmeix@suse.depiny@gmx.commeissner@suse.comcoolo@suse.comlnussel@suse.dejsmeix@suse.dejsmeix@suse.decfarrell@suse.comjsmeix@suse.dejslaby@suse.delnussel@suse.decoolo@suse.comjsmeix@suse.dejsmeix@suse.dejsmeix@suse.decoolo@novell.comjsmeix@suse.dejsmeix@suse.dejsmeix@suse.deaj@suse.dejsmeix@suse.delnussel@suse.dejsmeix@suse.dejsmeix@suse.dejengelh@medozas.deseife@opensuse.orgcoolo@novell.comlnussel@suse.dejsmeix@suse.dejsmeix@suse.decrrodriguez@suse.dejsmeix@suse.dejsmeix@suse.dejsmeix@suse.dejsmeix@suse.de- Replaced the non-working saned@.service with the simpler kind according to the second template in "man saned" of the therein described "systemd configuration for saned" (boo#1074054).- Drop BuildRequires for libieee1284-devel and libieee1284 which is only needed for some parallel port scanners but parallel port scanners are no longer supported so that the backends canon_pp, hpsj5s, and mustek_pp are no longer provided. - Fixed installation of systemd unit files saned@.service and saned.socket that enable socket based saned activation which replaces xinetd (boo#1074054).- add a 32bit devel package for use in wine32 bit builds- Deleted xinetd service in favor of socket based activation via systemd unit files saned@.service and saned.socket see https://build.opensuse.org/request/show/504186- Upgraded to sane-backends version 1.0.27: There is no 1.0.26 release of sane-backends. That number was skipped so that the SANE upstream development version numbers would more clearly be an extension of the prior release. Changes since 1.0.25: * Significant enhancements to canon_dr, epjitsu, epsonds, fujitsu, genesys, hp3500, pixma and xerox-mfp backends. * Minor updates, bugfixes or scanners added in several backends. * 30+ new scanner models supported. * Made libusb-1.0 the default for USB support. * Switched code from C90 to C99 (Thanks to Volker Diels-Grabsch). * Updated Linux USB3 workaround: The Linux USB3 workaround which was added in version 1.0.25 is now disabled by default. If you have difficulty using a scanner which previously worked, or intermittent scanner availability, try setting the new environment variable SANE_USB_WORKAROUND=1 before starting your frontend. * Documentation and translation updates. * Bugfixes (Avahi, threading, USB, ICC/PNG/JPEG, etc). * Reduced compiler warnings, improved code: A special thanks goes to Olaf Meeuwissen for picking up the janitorial duties in sane-backends. He has found and fixed a large number of long-standing bugs, curated the SANE upstream bug tracker, improved the build scripts and docs, and provided user support. - CVE-2017-6318.patch is no longer needed because the issue is fixed in the upstream sources. - dell1600n_net-fix-strncat.patch is no longer needed because the issue is fixed in the upstream sources.- CVE-2017-6318.patch fixes CVE-2017-6318 which is about that via access to saned some opcodes could leak uninitialized memory back to the requester allowing information disclosure of memory content in saned (bsc#1027197). In general regarding "access to saned" see https://en.opensuse.org/SDB:CUPS_and_SANE_Firewall_settings- sane-backends.builttime.patch: reduce build-compare noise- remove gphoto2 backend, as is usefulness is highly questionable, but adds many (indirect) build and runtime dependencies- Upgraded to sane-backends version 1.0.25: Changes since 1.0.24: * New backends: epsonds (Epson DS, PX and WF series), pieusb (PIE and Reflecta film/slide scanners). * Support for JPG and PNG output format in scanimage. * Significant enhancements to avision, canon_dr, epjitsu, fujitsu, genesys, kodakaio and pixma backends. * Minor updates, bugfixes or scanners added in several backends. * 300 new scanner models supported. * Workaround for USB3 problems in Linux kernel. * Added code for IR functionality. * Documentation and translation updates. * Bugfixes (threading, networking, udev rules). A big thanks to Olaf Meeuwissen, for his efforts in bug triage, patch wrangling and code cleanups. - fix-buffer-overflow.patch, fix-mustek_pp_ccd300.c.patch, install-umax_pp-tool.patch, MG5550-works.patch are obsolete since sane-backends-1.0.24 because it is fixed in the source. - re-add-SANE_CAP_ALWAYS_SETTABLE.patch should be longer needed because there should be longer a fontend that references SANE_CAP_ALWAYS_SETTABLE in its source code. - Recreated adapt_epkowa.desc_for_yast2-scanner.patch according to the comment in sane-backends.spec so that it applies for sane-backends-1.0.25. - Dropped avision.c.patch and avision.conf.patch (cf. the entry below dated "Mon Sep 15 23:23:23 UTC 2013") because it does no longer apply to sane-backends-1.0.25 sources. Issues that are not specific for a particular Linux distribution must be fixed directly at SANE upstream so that all Linux distributions get it properly fixed and not via patches at one particular Linux distribution where it falls apart each time when SANE upstream changes that sources. - Added BuildRequires for libpng-devel and libtiff-devel because scanimage output format supports PNG and TIFF. - dell1600n_net-fix-strncat.patch fixes the following build error: Statement might be overflowing a buffer in strncat. BAD: strncat(buffer,charptr,sizeof(buffer)) is wrong GOOD: strncat(buffer,charptr,sizeof(buffer)-strlen(buffer)-1) The upstream issue report is https://alioth.debian.org/tracker/index.php?func=detail&aid=315198&group_id=30186&atid=410366 - Disabled use of LaTeX to generate documentation because LaTeX blows up the build system and "BuildRequires: texlive-latex" causes various cycles and the sane.ps documentation is not for users but for developers who could get the "Programmer's Documentation" from SANE upstream at http://www.sane-project.org/docs.html- MG5550-works.patch: support Canon Pixma MG5500- Upgraded to sane-backends version 1.0.24: Changes since 1.0.23: * Significant enhancements to pixma, genesys, kodakaio, fujitsu, canon_dr. * Minor updates, bugfixes or scanners added in several backends. * Added new testsuite. * 51 new scanner models supported. * USB support improvements. * Improved build system (mingw64, bug fixes, default pthread on Linux). * Documentation updates. * Bugfixes. For Details see the ChangeLog file. - sane-backends-1.0.21-SCX4500W.patch that adds usb id for SCX4500W is obsolete since sane-backends-1.0.24 because it is fixed in the source. - fix-no-return-in-nonvoid-function.patch that fixes a "control reaches end of non-void function" gcc warning in kodakaio.c is obsolete since sane-backends-1.0.24 because it is fixed in the source. - Recreated adapt_epkowa.desc_for_yast2-scanner.patch according to the comment in sane-backends.spec so that it applies for sane-backends-1.0.24.- Workaround for hp scanjet 8200: As described in https://bugzilla.novell.com/show_bug.cgi?id=840443 when operating on a hp scanjet 8200 the avision driver gets stuck in a loop trying to detect an ADF, even if none is present. In order circumvent this issue, following workaround has been implemented: 1) create an option "enforce-no-adf" in the file avision.conf 2) patch the code in avision.c to make use of this option, if the conditions that lead to the unsuccessful ADF search (namely detection of NO ADF but reporting of SOME ADF type) is given. Per default the new option is inactive by comment. Activate at your own risk! An upstream report was added to https://alioth.debian.org/tracker/index.php?func=detail&aid=314108&group_id=30186&atid=410366 - created patch110 (avision.conf.patch) for avision.conf - created patch111 (avision.c.patch) for avision.c- fixed /etc/slp.reg.d/ ownership conflict, just have it as %dir and the files as %config. (see OBS RQ 162582 decline message)- update license to new format- require libv4l-devel to enable v4l backend- Our own special source file epkowa.desc is dropped because the package iscan-free is dropped (bnc#788756). Instead adapt_epkowa.desc_for_yast2-scanner.patch adapts the upstream epkowa.desc for yast2-scanner which works without additional adaptions in yast2-scanner so that the sane-backends package works on released openSUSE systems without a RPM requirement for a yast2-scanner update (bnc#788756 starting at comment#14).- Upgraded to sane-backends version 1.0.23: New backends: kvs40xx (Panasonic KV-S40xx), kodakaio (Kodak AiO ESP and Hero). Significant enhancements to several backends. 30 new scanner models supported. V4L support improvements. Improvements for builds on multiple platforms. Improved udev rules. Updated software deskew algorithm. Documentation updates. Bugfixes. Note: This is one more release of the SANE 1.0 series, compare the below entry dated "Thu Feb 28 13:56:15 CET 2008". - sane-backends-1.0.22-xerox_mfp-fix-usb-devices.patch that fixes usb device support in xerox_mfp is obsolete since sane-backends-1.0.23 because it is fixed in the source. - fix-no-return-in-nonvoid-function.patch fixes a "control reaches end of non-void function" gcc warning which lets build fail with "no-return-in-nonvoid-function" error in kodakaio.c.- license update: GPL-2.0+ and SUSE-GPL-2.0+-with-sane-exception and SUSE-Public-Domain The LICENSE file in the sane-backends packages explains the licensing of the package. Added SUSE-GPL-2.0+-with-sane-exception to the spreadsheet linked from license.opensuse.org as that license is not yet upstream at http://www.spdx.org/licenses (hence the SUSE- proprietary extension)- Configure --enable-libusb_1_0 plus BuildRequires libusb-1_0-devel to use libusb1 (instead of using libusb0 via libusb-compat), see https://bugzilla.novell.com/show_bug.cgi?id=559697#c7 for the libusb versioning numbering. - Use traditional bash scriptlets for post/postun with an explicite "exit 0" line at the end to be fail safe and therefore also "PreReq: /sbin/ldconfig" explicitly, see the "Shared_libraries" section in http://en.opensuse.org/openSUSE:Packaging_scriptlet_snippets - BuildIgnore ghostscript-x11 because BuildRequires texlive-latex is needed for sane.tex -> sane.dvi -> sane.ps but texlive-latex requires texlive which requires ghostscript-x11 but the latter is not needed and blows up the build system. - Minor cleanups in the spec file.- added explicit "BuildRequires libusb-compat-devel" to re-add support for USB scanners- sane-backends-1.0.21-SCX4500W.patch adds usb id for SCX4500W - sane-backends-1.0.22-xerox_mfp-fix-usb-devices.patch fixes usb device handling regression in xerox_mfp (bnc#745245)- add libtool as buildrequire to avoid implicit dependency- Added an entry for "SCSI processor EPSON Perfection1640" to libsane.rules (bnc#681146) see in particular https://bugzilla.novell.com/show_bug.cgi?id=681146#c43 - Added a wildcard entry for any "SCSI processor EPSON SCANNER*" to libsane.rules see the "55-libsane.rules"/"Device recognition" mail thread in June 2011 on sane-devel@lists.alioth.debian.org- Fixed udev rules for SCSI scanners: For SCSI scanners "ATTRS" is mandatory for every sysfs attribute (in particular ATTRS{type}, ATTRS{vendor}, and ATTRS{model}) so that "ATTRS" is replaced by "ATTR" only for USB scanners (see openSUSE/Novell Bugzilla bnc#681146).- Fixed udev rules for SCSI scanners: Because of openSUSE/Novell Bugzilla bnc#436085 (see the entry below dated "Tue Oct 21 13:12:42 CEST 2008") "SYSFS" and "ATTRS" were replaced by "ATTR" everywhere in libsane.rules but for SCSI scanners "ATTRS{type}" is mandatory (see openSUSE/Novell Bugzilla bnc#681146).- fix dependencies of devel package- Upgraded to sane-backends version 1.0.22: New backends: kvs20xx (Panasonic KV-S20xx), magicolor (Konica-Minolta). Significant enhancements to several backends. More than 80 new scanner models supported. Support many more networked scanners. Added -A option to scanimage. Improved build system. Improved USB support. Improved udev rules. Documentation updates. Bugfixes. Note: This is one more release of the SANE 1.0 series, compare the below entry dated "Thu Feb 28 13:56:15 CET 2008". - sane-backends-1.0.21-i18n.patch, fix-genesys-create_range-type.patch, fix-xerox_mfp-color-mode.patch, and canon-backend-autoprobing.patch are obsolete since sane-backends-1.0.22 because it is fixed in the source. - Adapted how we derive our libsane.rules file from the generated one which uses now "ATTRS" (instead of "SYSFS"), see the below entry dated "Tue Oct 21 13:12:42 CEST 2008". - Updated models.dat to the one from the current HPLIP 3.11.1. - Added only those new models from epkowa.desc in the sane-backends 1.0.22 sources which 'requires DFSG non-free' plugin software to our epkowa.desc source file so that the supported models in our epkowa.desc source file still match to what is supported by our iscan-free package but more users of models which require the proprietary software from Avasys will be informed via yast2-scanner.- fix-xerox_mfp-color-mode.patch adds SANE_VALUE_SCAN_MODE_HALFTONE in xerox_mfp.c to fix a regression in sane-backends-1.0.21 where the xerox_mfp works only in grayscale mode (see openSUSE/Novell Bugzilla bnc#658017). - Updated models.dat to the one from the current hplip-3.10.9.- Configure with --enable-pthread so that backends can use POSIX threads to implement asynchronous I/O instead of the default which uses a pipe and forks a reader process (see openSUSE/Novell Bugzilla bnc#633780).- BuildRequires libieee1284-devel. - Split up devel package.- Updated models.dat to the one from our current HPLIP version so that the generated hpaio.desc matches to our HPLIP version. - Enhanced epkowa.desc only with models which require proprietary software so that the supported models in epkowa.desc still match to what is supported by our iscan-free package but more users of models which require proprietary software will be informed via yast2-scanner.- remove disable-resmgr-support.patch. It's not needed as configure won't find resmgr anyways (see Novell/Suse Bugzilla bnc#605914).- Upgraded to sane-backends version 1.0.21: New backends: kodak (Kodak i18xx), kvs1025 (Panasonic KV-S10xx), p5 (Primax PagePartner) Many backends updated. 224 more scanner models supported. More consistent option naming. Scanimage no longer writes image to tty. Modern translation infrastructure. Improved saned network daemon. Internal SCSI, USB, threading, TCP & UDP code updates. Updated HAL and udev support. New sanei_magic image processing library. Documentation updates. Bugfixes. Note: This is one more release of the SANE 1.0 series, compare the below entry dated "Thu Feb 28 13:56:15 CET 2008". - fix-hp3900_config.c.patch, sane-desc_closedir.patch, fix-lexmark_low-memory-leak.patch, and fix-hp3900_sane-string-option-sizes.diff are obsolete since sane-backends-1.0.21 because it is fixed in the source. - sane-backends-1.0.20-xerox_mfp.diff backported post 1.0.20 xerox_mfp changes and is therefore removed since sane-backends-1.0.21 which contains those changes, compare the below entry dated "Thu Oct 8 09:35:17 UTC 2009". - Slightly adapted disable-resmgr-support.patch and no-descriptions-external-hpoj.patch to apply to the sane-backends-1.0.21 sources. - fix-genesys-create_range-type.patch lets in genesys.c the create_range function be of type 'SANE_Range *' to fix 'assignment makes pointer from integer' bugs wherever the create_range function is called.- HAL is deprecated and does no longer support to grant read/write device access permissions for scanners to the currently logged in "desktop" user. Therefore all HAL related stuff was removed (see Novell/Suse Bugzilla bnc#593946). - Removed /usr/lib[64]/libsane.la (see Novell/Suse Bugzilla bnc#592143).- package baselibs.conf- fix udev warnings 'NAME="%k" is superfluous'- updated patches to apply with fuzz=0- backport xerox_mfp changes to support samsung printers- fix-lexmark_low-memory-leak.patch adds a missing call to free in sanei_lexmark_low_find_start_line in backend/lexmark_low.c (see Novell/Suse Bugzilla bnc#542341). - fix-hp3900_sane-string-option-sizes.diff fixes option sizes because otherwise the frontend (e.g. xsane) may crash (see Novell/Suse Bugzilla bnc#535752).- Updated models.dat with the one in the HPLIP 3.9.8 sources and adapted create_hpaio.desc_from_models.dat accordingly so that it results a hpaio.desc scanner description file for SANE which matches to the sacnner models which are supported by our currently provided HPLIP version.- use find_lang macro - run ldconfig correctly- sane-desc_closedir.patch adds a missing call to closedir to sane-desc.c (see Novell/Suse Bugzilla bnc#530313).- fix-hp3900_config.c.patch fixes a possible for loop overflow in hp3900_config.c (see Novell/Suse Bugzilla bnc#517281). - fix-mustek_pp_ccd300.c.patch fixes undefined operations in mustek_pp_ccd300.c (see Novell/Suse Bugzilla bnc#498435).- re-add-SANE_CAP_ALWAYS_SETTABLE.patch re-adds SANE_CAP_ALWAYS_SETTABLE to sane.h which was erroneously removed in sane-backends-1.0.20 so that sane-frontends and xsane can no longer build, see http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=527675- Upgraded to sane-backends version 1.0.20: New backends: canon_dr (Canon DR-series), coolscan3 (Nikon LS & Coolscan), rts8891 (Umax & HP 44xx), xerox_mfp (Samsung/Xerox/Dell MFPs) Many backends updated. 75 more scanner models supported. New (automake compatible) build system. Avahi support. More network scanners supported. Epson backend deprecated, use epson2. Coolscan2 backend deprecated, use coolscan3. Internal SCSI, USB, threading, TCP & UDP code updates. Updated HAL and udev support. Improved saned configuration. Scanimage updates. Updated translations. Documentation updates. Bugfixes. Note: This is one more release of the SANE 1.0 series, compare the below entry dated "Thu Feb 28 13:56:15 CET 2008". - Re-enabled "autoreconf -fi" in the build section (it was disabled because it failed for sane-backends-1.0.19). - fix-uninitialized-variables.patch and fix-sanei_scsi_find_devices.patch are obsolete since sane-backends-1.0.20 because it is fixed in the source. - Adapted install-umax_pp-tool.patch for the new build system (now tools/Makefile.am instead of tools/Makefile.in). - no-descriptions-external-hpoj.patch removes descriptions-external/hpoj.desc from doc/Makefile.am because it is intentionally removed from the sources in the prep section to avoid confusion with its successor hpaio.desc (since openSUSE 10.3 the package hp-officeJet which provided the hpoj driver is dropped).lamb12 15241832751.0.27-lp150.4.11.0.27-lp150.4.1udevrules.d56-sane-backends-autoconfig.rules/etc//etc/udev//etc/udev/rules.d/-fmessage-length=0 -grecord-gcc-switches -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector-strong -funwind-tables -fasynchronous-unwind-tables -fstack-clash-protection -gobs://build.opensuse.org/openSUSE:Leap:15.0/standard/6ae277d751eb730e0adfa2648db98cbd-sane-backendscpioxz5x86_64-suse-linuxdirectoryASCII textusCQJW4sane-backendsutf-8b83e6d82fde47989d2f2b7dd8bb27705ef7378ec808293372b81d7e1f8325130? 7zXZ !t/# ] crt:bLL ~ƫ5тINi9?ʋ)f^}Ke%Zevvs]Mmm͛!ݛs.rcXrGT'%UaqIJ*~]boYi,u@7pUI>K3r&qJLzTvV>QVH6ԪܦK BY[\񠟞wƴtbO[҆"~)|vёs%BL>e+A1CvZ^%kH2[BRRo]FOx*F|4;gƕyN9@% vw2݅ W0Zf M# IR%64ZcE<؟9Nn[ <{-3ܗay5t^CW#k|ȁur[:yd(u}{@fWE_0IK Wl祡 GYB,}*(RrqYOlwnfsXv$G1"qnj6fI~ O`Y܂h, 2M l6kVQcgx !';FɐXOg`_F5a|jH e4r'̿CcߊX rGt/ v!Ui v5nzI:Zӭ E>^kjI} #pmhu׾V$H?Ю) dfMv}ʳ4l -F>=$~9fXTOfQ Jn1qDN%C|UTk*` WAsT9pTpЄ "B%y/ߛE7*r3DUz\6~zriMom OѢ"؝<S?\HeSMe5["&:oDW;C68G-8J-hl~DKF\<tH&ūm׾gQɈ. }i!s2}[l(ƭ4gcJY!W0V/Yo5@Z=qװ~02vs;9y%8ŋsl.r!S.)j?mĕIOcM]ED!g܈ܯ!ƣͮ,TDr TƼ$ݖ8Z>`kd)7[)~"%U_JUVmwYt+ۃкHUwE%dڙi0fnPTƴM*V`V[^]!|-[FV6/`%)X=R#@dW&7/~5%/2ޑ4.=R#h\e}@Wo6xʵsF44̀Eqʊ0W&eԝ{pqCj+m:ĒKIYAiR9m+MmQhl"/uQv3؍p}{X2YG-ٙ&[͉hzR N"Kj^5P] H3p@CU[-.PU}hmx& )]e4{{T8lEV)v*[WysakaX q0t0˃{p